1. Push the magazine release clip and take out magazine
2. Push the black pin above the trigger down, and then pull it out (Seperate top of gun from bottom of the gun
3. Push safety lever into safety position
4. Get a small philips head screwdriver and push the safety pin out from the back
5. Push out bottom pin from the bottom of the gun, releasing the back of the gun
6. Take out the hammer pin, then take out the hammer itself (It will have a small wire attached to it on the inside)
7. Also take out the metal piece in front of the hammer
8. Take out the screw in front of trigger
9. Take out firing mechanism
10. Unscrew the magazine release pin
11. Pull out the trigger
12. Yay you are done
